Kodak Carousel Shipping

This applies to Kodak or Kodak compatible carousels only.
For all other Carousels or slide trays, you must remove the slides and put them in stacks that can be held in one hand. (See instructions.)

Slides in the 80 or 140 slide carousels can be sent in the carousel. The slides in the "Ferris wheel" type, which hold 100 slides, are stuck in tight so they don't fall out and are difficult to get out.

 

Click here to determine which carousel you have.
Click here for the Carousel Shipping Page

We Encourage You To Send
Your Slides In The Kodak Carousels.

Do you have your slides all stored in 35 mm slide carousels? No doubt they are all organized already. That's a big start! Yes, it will cost you a little more to ship this way but your time is worth something. Consider how much time you will have to spend if you take all those slides out, stack them in 2" to 4" stacks, label them and rubber band them.

 

 

 

Make sure the locking ring on the inside of the tray is tight and this should take care of any noise issue.

A 140 slide carousel in the box

The box below has thirteen carousel boxes in it with each carousel having 140 slides. The box dimensions are as follows:
23" Length x 18" Width x 11" Height and weighs 32 pounds.

---

The box below is 18" length x 14" width x 11" high. The weight is 18 pounds and it holds seven 35mm slide carousels.

This shot shows the minimal packing material needed for the box above.

We are not trying to make money off the shipping charges as all too many other companies seem to do.

 

This applies to Kodak or Kodak compatible carousels only.
For all other Carousels or slide trays, you must remove the slides and put them in stacks that can be held in one hand. (See instructions.)

Click here to determine if your carousel is Kodak compatible.
Click here for the Carousel Shipping Page